Soarus L.L.C. G-Polymer Applications - Woven and non-woven fibers
HomeProductsApplicationsHealth & SafetySupportAffliated CompaniesContact Us

G-Polymer

Applications - Woven and non-woven fibers

Water soluble nonwoven fabric

Since monofilaments have low strength, use in multicomponent spinning is suitable. Please consider the following points related to monofilaments.
1) Textiles could adhere to each other when rolled up.
2) Use a spinning oil with the lowest water content possible.

 

 

 

Reference

  • Melt-casting performance

Applications

Water soluble nonwoven fabric


Nichigo G-Polymer nonwoven fabric before water immersion

Nichigo G-Polymer nonwoven fabric before water immersion

Recommended grades

*1: Measured using the DSC method
*2: 2160 gf at 190oC
The numbers above are sample values, not guaranteed values.

Example of spun-bonded nonwoven fabric treatment conditions

Equipment used: spun-bonded nonwoven fabric production equipment

Resin used: Nichigo G-Polymer OKS-8042P

【Settings】
・ Screw pattern: full flight
・ Set temperature pattern (Please refer to the above figure)
・ Quench overall length: 400 mm
・ Ejector overall length: 575 mm
・ Nozzle specifications
- Specification: fai φ0.6-1.8L-1795H
- Number of holes: 2992
- Type: single
- Arrangement: staggered

  Contact  
Soarus L.L.C.
3930 Ventura Drive Suite 300
Arlington Heights, IL 60004
USA
TEL: +1-847-255-1211
FAX: +1-847-255-4343
Email: soarusinfo@soarus.com